沖壓分板機特色：
1、PCBA分板機為模具沖裁式分板機。
PCBA is a die blanking machine.
2、設備結構緊湊，機身堅固.
The equipment has compact structure and strong body
3、設備運行平穩，低振動，低噪音。
Stable operation, low vibration and low noise.
4、中文觸摸屏閃現，面板清晰，中文報警功用閃現，異常報警一望而知。
The Chinese touch screen flashes, the panel is clear, the Chinese alarm function flashes, and the abnormal alarm can be seen at a glance.
5、設備具有通用性。可替換多款模具，且換模便利方便。
The equipment is universal. It can replace many kinds of moulds, and it is convenient and convenient to change moulds.
6、設備安全性：
Equipment safety:
6.1.雙開關雙手動作啟動。
Double switch, two hands action start.
6.2.設備裝備下模進出滑道，下模自動進出，取放產品便利安全。
The equipment is equipped with a slide way for the lower die to enter and exit automatically, which makes it convenient and safe to take and place products.
6.3.設置急停開關，發現問題及時停機。
Set the emergency stop switch to stop the machine in time when problems are found.
6.4.設置安全門，避免裝置調試模具時手的誤入。（正常操作時無安全門不作業）
The safety door is set to avoid the wrong entry of hands when debugging the mold. (no operation without safety door during normal operation)
6.5.設置安全門口對射設備，模具上放錯板、對射設備可以感應失誤，模具不能進入。
The safety door is equipped with the opposite firing equipment. The wrong plate is placed on the mold, and the shooting equipment can induce errors, and the mold cannot enter.
6.6.安全氣壓設置功用，超限報警。自動計數，超限停機。
Safety air pressure setting function, overrun alarm. Automatic counting, over limit shutdown.
7、將切板時產生的內應力下降而且避免錫裂
The internal stress produced by cutting plate is reduced and tin crack is avoided
8、沖切半成品PCB、 FPC效率高。
The efficiency of punching semi-finished PCB and FPC is high.
沖壓分板機機器標準：
Standard for stamping machine
1、機器尺度 Machine scale： 920×740×1750mm
2、沖裁力 Blanking force ： 8T
3、氣缸回程開模力 Cylinder return opening force： 4T
4、作業氣壓 Pneumatic operation 0.50-0.70Mpa枯燥氣源
5、放板面積 Plate area 330×220mm
6、運用電壓 Applied voltage 220VAC
7、行程速度 Travel speed ： 8～15s可調（不含放板取件時刻）
8、作業行程 Working schedule ： ≥60mm
9、作業噪音 Working noise ： ≤60dB
10、作業精度 Operation accuracy ： ±0.05mm
11、機器分量 Machine component 580kg
中文版 
English1
